October maintenance for a very cold climate
Long, hard winters: pipes, heating equipment and roof snow load drive the plan.
6 tasks this month. The median typical first freeze across the region’s counties is Sep 25 and the last is May 17; your county can differ by weeks.
October6 tasks
- This monthPress the test button on every smoke and CO alarm.
An alarm you have not heard in months may have a dead battery or sensor. NFPA recommends testing smoke alarms at least once a month.
How
Hold the test button until it sounds. Anything silent or chirping: replace the battery, or the whole alarm if it is past its date.
- This monthCheck the HVAC filter and replace it if it is gray or clogged.
ENERGY STAR advises inspecting filters monthly: a dirty filter raises energy costs and can damage the equipment, leading to early failure.
How
Turn the system off, slide the filter out, and match the size printed on its edge. Arrow on the frame points toward the blower.
- This monthPress TEST and RESET on every GFCI outlet.
GFCIs in kitchens, baths, garages and outdoors cut power when current leaks to ground. A failed one looks normal until it fails to trip.
How
Plug in a lamp, press TEST (the lamp should go off), then RESET. If it does not trip, have an electrician replace it.
- This monthLook over the roof, flashing and gutters from the ground with binoculars.
Missing or lifted shingles, cracked boots around vent pipes and loose flashing are cheap fixes before they leak.
How
Walk the whole perimeter. Note anything lifted, missing or rusted and photograph it. Stay off the roof.
- WatchClean the dishwasher filter.
Most current dishwashers have a manual filter; when it clogs, dishes come out dirty and the drain pump strains.
How
Twist out the filter at the bottom of the tub, rinse it under the tap and scrub gently with a soft brush.
- WatchReplace the whole-house humidifier pad and open its damper for winter.
A scaled pad stops humidifying and can grow mold. (Skip this if your furnace has no humidifier.)
How
Turn off the humidifier water, swap the pad, and set the bypass damper to the winter position.